Tell Me Questions
Brakes should not feel spongy or slack. Brakes should be tasted as you set off. Vehicle should not pull to one side.
Manufacturer's guide. use a reliable pressure gauge. check and adjust pressures when tyres are cold. don't forget spare tyre, remember to refit valve caps.
The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable.
Note: Some restraints might not be adjustable.
No cuts and bulges, I .6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference of the tyre.
Explain you'd operate switch (turn on ignition if necessary), then walk round vehicle. As this is a 'tell me' question, there's no need to physically check the lights.
Warming light should illuminate if there is a fault with the anti-lock braking system
Explain you'd operate switch (turn on ignition if necessary), then walk round vehicle. As this is a 'tell me' question, you don't need to physically check the lights.
Explain you'd operate the brake pedal, make use of reflections in windows or doors, or ask someone to help.
If the steering becomes heavy the system may not be working properly. Before starting a journey 2 simple checks can be made.
Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.
Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.
Operate switch (with ignition or engine on if necessary), check with main beam warning light
Identify dipstick I oil level indicator, describe check of oil level against the minimum and maximum markers
Identify the high and low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level
Identify reservoir, check level against high and low markings
Show Me Questions
Operate control to wash and wipe rear windscreen (turn ignition on if necessary)
Operate control to wash and wipe front windscreen (tum ignition on if necessary)
Select relevant control (turn on ignition if necessary).
Select relevant control and switch on (turn on ignition if necessary)
Check is carried out by using control (turn on ignition if necessary)
set all relevant controls including fan, temperature and air direction (heated screen if available) to clear front windscreen (turn on ignition if necessary)
Select the correct window button and push (turn on ignition if necessary), or use the window winder if fitted.